[jim762]

My MR3 in progress. Not really sure where it will go. I will eventually post a pic of the finished maker (if it ever happens)


PHASE 1 (stock)



PHASE 2 (14 " Tru-Flight barrel, red/green dot and Folding stock)

This post has been edited by jim762: 19 October 2008 - 01:49 PM

[T-RAN]

Not bad, the tigerstripes are pretty good looking too. The hopper looks a little out of place though.

T-RAN

[jim762]

T-RAN, on Oct 20 2008, 07:28 AM, said:

Not bad, the tigerstripes are pretty good looking too. The hopper looks a little out of place though.

T-RAN

Yeah I know, but i can't seem to find a low profile hopper. what do you use on your MR2?

[T-RAN]

Well I sold mine about a year or so ago and I just used a gravity fed hopper, oh and I had an MR1 so it would make sense i guess.
My friend has a MR2 though and uses the spyder fasta loader and it looks pretty good.

T-RAN

This post has been edited by T-RAN: 24 October 2008 - 04:59 PM

[jim762]

Heres is Phase 3 (J&J ceramic barrel, trinity feedneck, timmy detents, Extreme rage spring kit and new paint)


I had to remove the red dot because the feedneck pulled the loader in closer and hits the sight. I will have to get a 45 degree rail for it.


Figured i'd show you guys my wife's mask too. she wanted tiger stripes but wanted it to be a little girly, so i added pink highlights. It shouldn't stand out to bad.

[P.O.M.E.]

Looks good, what paint did you use on the mask?

[jim762]

P.O.M.E., on Oct 28 2008, 07:58 PM, said:

Looks good, what paint did you use on the mask?

I used green Krylon camo paint and testors model paint for the pink highlites. I had to do it twice, the first time i put it on to thick and it cracked. I just sprayed a very thin coat.